Control device communication

vport OBD
The filling or testing of modern brake systems with ABS or ESP requires the communication with electronic control devices in vehicles.

You look for a competent partner for the control devices communication? Dürr Somac has developed the first filling station with integrated ABS control via serial communication for the filling of brake systems with dry hydraulic unit. We offer our long term experience via our diagnostic adapters vport OBD and vport C as well as the corresponding software components.

You want to be flexible during the control unit communication? Our vport OBD is one of the smallest available interface modules with radio interface for the industrial use. It is plugged directly to the diagnostic interface within the vehicle via the integrated OBDII plug. Therefore hindering cable connections do not apply and the mobility of the operating staff is not restricted.

A host interface with a variety of connection options offers several opportunities for networked and individual solutions.

Or do you want to carry out the control device communication directly via ECU? We also offer this opportunity. The vport C can be equipped with diagnostic plugs for a variety of designs and for this reason they can be adapted directly to the ECU.

You want to use the time during the brake filling for additional operations, e.g. parameterisation or downloads? That is possible, too. Our interface modules vport OBD and vport C are able to do multiple sessions and to communicate with several control devices within the vehicle.

Your assembly shall work more efficiently? The radio interface permits to pre-locate the testing processes in the assembly line or to relocate them in so far dead areas such as suspension lines. So you can reduce the testing periods at the end of the assembly line.


Products:

  • vport OBD
  • vport C